Mindray A9 Service Manual

2-13
Part Description
Values on the APL valve and airway pressure gauge are for reference only. The calibrated
patient's airway pressure is displayed on the user interface.
2.1.2.6 Breathing System
Part Description
F1
Breathing check valve
inspection window
You can inspect the status of the inspiratory and
expiratory check valves from outside the machine.
F2
Leak test plug
The leak test plug is used to connect the breathing tube
for the leak test.
F3
Expiration connector
The breathing circuit has an expiration connector.
F4
Inspiration connector
The breathing circuit has an inspiration connector.
F5
Bag arm
The bag arm is used to connect the manual ventilation
bag.
F6
O2 sensor
The O2 sensor is used to monitor the O2 concentration.

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA