Mindray BS-130 User Manual

3 Installation 3-12
Parameter Description
Reac. Time The unit is the interval of collecting photometric data, which
equals to 18 seconds for BS-120/BS-130 and 16.3 seconds
for BS-180/BS-190.
The first edit box is start time, and the second one is end
time.
For the Endpoint method, the reaction time refers to the
interval between the start of the reaction and the end of the
reaction.
For the Kinetic or Fixed-time method, the reaction time refers
to the interval between the point when the reaction becomes
stabilized and the point when the reaction is no longer
monitored.
If the reaction time is negative, it means that you should
deduct the reagent blank or sample blank.
For the single-reagent test, the analyzer defines the
photometric data collection point as 0 exactly before the
sample has been dispensed, that is, “0” means the reagent
blank point. The value must not be negative
For the double-reagent test, the analyzer defines the
photometric data collection point as 0 exactly after the
second reagent has been dispensed. The value can be
negative.
Incuba. Time The system assigns the incubation time as 5 minutes.
Unit Unit of the result.
Precision Precision of the result.
R1 It refers to the volume of the first reagent to be dispensed for
the reaction. Increment is 1.
BS-120/BS-130: 180-450µl
BS-180/BS-190: 150-450µl
R2 It refers to the volume of the second reagent to be dispensed
for the reaction. Increment is 1.
BS-120/BS-130: 30-450µ
BS-180/BS-190: 5-450µl
Sample
Volume
It refers to the sample volume (3-45µl) to be dispensed for
the reaction. Increment is 0.5.
NOTE
The sum of the entered R1, Sample Volume
and R2 (as needed) must be as follows:
213µl-500µl for BS-120/BS-130
158µl-500µl for BS-180/BS-190

Mindray BS-130 Specifications

General

Brand	Mindray
Model	BS-130
Category	Measuring Instruments
Language	English