Mindray iPM-9800 - Starting Report Printouts

22-2
 Select a connected printer
Select [Printer] and then select a connected printer as the monitor’s printer.
 Search for a printer
If your selected printer is not in the list or a new printer is added into the network, you
can select the [Search Printer] to re-search for all printers in the network.
 Set up the paper
Select [Paper Size] and toggle between [A4] and [Letter].
 Print on both sides
By default, the monitor prints out patient reports on one side. If you set [Print On Both
Sides] to [On], the monitor will print out patient reports on both sides.
22.4 Starting Report Printouts
Reports Contents Procedures
ECG reports ECG waveforms and relevant
parameter values
Select [Print Setup >>]→[ECG Reports
>>]→[Print] in the main menu.
Tabular trends Depend on the selected
parameter group, resolution
and time period
Select [Print Setup >>]→[Tabular Trends
Reports >>]→[Print] in the main menu, or
select[Review >>]→[Tabular
Trends]→[Print]→[Print] also in the main
menu.
Graphic trends Depend on the selected
parameter group, resolution
and time period
Select[Print Setup >>]→[Graphic Trends
Reports >>]→[Print] in the main menu, or
select[Review >>]→[Graphic
Trends]→[Print]→[Print] also in the main
menu.
Arrhythmia
events review
ECG waveforms and relevant
parameter values
Select [Print] in [Arrh. Events]
Parameter alarms
review
Depend on the selected alarms
Select [Review >>]→[Alarms]→[Print] in
the main menu.
Interpretation of
resting 12-lead
ECG
12-lead ECG waveforms and
analysis results
Select [12-Lead Analysis]→[Print Report]
when an interpretation of resting 12-lead
ECG is completed, or select [Review
>>]→[12-Lead Analysis]→[Print] in the
main menu.
Realtime waves Depend on the selected
waveforms
Select [Print Setup >>]→[ECG Reports
>>]→[Print] in the main menu.