2-5
2.2.3 Rear View
1. Network Connector
It is a standard RJ45 connector, through which the patient monitor can be networked.
2. Video Connector
It connects a standard VGA color monitor, which extends the display capability of
your monitor. The contents displayed on the secondary display screen accord with
those displayed on the monitor screen.
3. Auxiliary Output
It is a standard BNC connector, through which analog signals, alarm signals or
synchronization signals can be outputted, depending on how your monitor is
configured.
4. RS232 serial port
It is a DB9 connector, used to connect a PC for data or a compatible device, and
supports DIAP communication protocol.
5. USB Connectors
They connect external storage devices.
6. AC Power Input
7. Equipotential Grounding Terminal
When the patient monitor and other devices are to be used together, their equipotential
grounding terminals should be connected together, eliminating the potential difference
between them.
1
2
3
4
5
6
7
To Next Page
Loading...
