Mindray iPM-9800 - Understanding the ECG Display

8-7
8.4 Understanding the ECG Display
In the all parameters screen, the patient monitor allows up to three ECG to be displayed
simultaneously. Following is an ECG display screen with 5-lead set and for reference only.
Your display may be configured to look slightly different.
1. Lead label of the displayed wave 2. ECG gain
3. ECG filter label 4. Notch filter status
Besides, pace pulse marks “
|
” are shown above the ECG wave if the [Paced] is set to [Yes ]
and the patient has a paced signal.
1. Current heart rate alarm limits
2. Heart beat symbol
3. Current heart rate
For 12-lead ECG display screen, refer to the section 12-Lead ECG Monitoring.
1 23 4
1
3
2