Mindray iPM-9800 - Changing Minitrend Length; Changing a Parameter for Viewing

6-4
6.2.2 Changing Minitrend Length
The minitrend length cannot be chosen for individual parameters. You can only change the
minitrend length for all parameters:
1. Select either parameter’s minitrend field.
2. In the [Minitrend Setup] menu, select [Minitrend Length] and then select your
desired setting.
3. Select [Exit]. Your change will take effect automatically.
6.2.3 Changing a Parameter for Viewing
You can also select your desired parameters to view their minitrends.
1. Select either parameter’s minitrend field.
2. In the [Minitrend Setup] menu, you can select your desired parameter from the select
parameter area. If you want to select other parameter, select [Other Parameters >>]
and then select your desired parameters.
3. Select [Ok].