D-1
D Alarm Messages
This chapter lists only the most important physiological and technical alarm messages. Some
messages appearing on your monitor may not be included.
In this chapter:
The “I” field indicates how alarm indications are cleared: “A” means all alarm indications can be
cleared, “B” indicates all alarm indications except the alarm message can be cleared, and “C”
indicates only alarm tones can be cleared.
The “L” field indicates the alarm level: H means high, M means medium and L means low. “*”
means the alarm level is user-adjustable.
XX represents a measurement or parameter label, such as ECG, NIBP, HR, ST-I, PVCs, RR, SpO
2
,
PR, etc.
In the “Cause and Solution” column, corresponding solutions are given instructing you to
troubleshoot problems. If the problem persists, contact your service personnel.
To Next Page
Loading...
