1-3
1.1.3 Cautions
CAUTIONS
z To ensure patient safety, use only parts and accessories specified in this manual.
z At the end of its service life, the equipment, as well as its accessories, must be
disposed of in compliance with the guidelines regulating the disposal of such
products. If you have any questions concerning disposal of the equipment, please
contact us.
z Electromagnetic field is capable of interfering with the proper performance of the
equipment. For this reason make sure that all external devices operated in the
vicinity of the equipment comply with the relevant EMC requirements. Mobile
phone, X-ray equipment or MRI devices are a possible source of interference as
they may emit higher levels of electromagnetic radiation.
z Before connecting the equipment to the power line, check that the voltage and
frequency ratings of the power line are the same as those indicated on the
equipment’s label or in this manual.
z Always install or carry the equipment properly to avoid damage caused by drop,
impact, strong vibration or other mechanical force.
1.1.4 Notes
NOTES
z Put the equipment in a location where you can easily see the screen and access the
operating controls.
z Keep this manual in the vicinity of the equipment so that it can be obtained
conveniently when needed.
z The software was developed in compliance with IEC60601-1-4. The possibility of
hazards arising from software errors is minimized.
z This manual describes all features and options. Your equipment may not have all
of them.
To Next Page
Loading...
