Mindray iPM-9800 - Repair and Disassembly; Tools and Preparations

6-1
6 User Screens
6.1 Tailoring Your Screens
You can tailor your patient monitor’s screens by setting:
 Waveform sweep mode
 Wave line size
 The way to draw waves
 The color in which each measurement’s numerics and waveform are displayed
 The waveforms to be displayed and their display order.
Some settings can be changed manually in monitoring mode. For details about
configuration mode, refer to the Managing Configuration chapter.
6.1.1 Setting the Waveform Sweep Mode
1. In the main menu, select [Others >>] or select [Waveform] in configuration mode.
2. Select [Sweep Mode] and toggle between [Refresh] and [Scroll].
 [Refresh]: The waveforms keep stationary, being refreshed from left to right by a
moving “erase bar”.
 [Scroll]: The waveforms move from the right to the left with time passing by.
6.1.2 Changing the Wave Line Size
1. Select [Waveform] in configuration mode.
2. Select [Wave Line] and toggle between [Thick], [Med] and [Thin].
6.1.3 Choosing the Way to Draw Waves
1. Select [Waveform] in configuration mode.
2. Select [Draw Wave] and then toggle between [Color] and [Mono]:
 [Color]: The waveform is optimized by the system and appears smooth.
 [Mono]: The waveform is unsmoothed.