Mindray iPM-9800 - Display Screen

2-6
2.3 Display Screen
This patient monitor adopts a high-resolution TFT LCD to display patient parameters and
waveforms. A typical display screen is shown below.
1. Patient Information Area
This area shows the patient information such as department, bed number, patient name,
patient category and paced status.
 : indicates that no patient is admitted or the patient information is incomplete.
 : indicates that the patient has a pacer.
If no patient is admitted, selecting this area will enter the [Patient Setup] menu. If a
patient has been admitted, selecting this area will enter the [Patient Demographics]
menu.
2. Date and Time
This area shows the system time of the patient monitor. By selecting this area, you can
enter the [System Time] setup menu.
3.Alarm Symbols
indicates alarms are paused. indicates alarms are turned off.
indicates alarm sounds are silenced. indicates alarm sounds are turned off.
1
3
45
9
2
6
7
8