Mindray iPM-9800 - Setting the Date and Time

3-12
3.9.5 Setting the Date and Time
1. In the main menu, select [Maintenance >>] → [System Time>>].
2. Set [Year], [Month], [Day], [Hour], [Minute] and [Second].
To set the date format and the time format,
1. In the main menu, select [Maintenance >>]→[User Maintenance >>]→enter the
required password and then select [Device Setup >>].
2. Select [Date Format] and toggle between [yyyy-mm-dd], [mm-dd-yyyy] and
[dd-mm-yyyy].
3. Select [Time Format] and toggle between [24h] and [12h].
WARNING
z When connecting compatible devices to the patient monitor via RS232 serial port,
make sure that the baud rate of the compatible devices is consistent with that of the
patient monitor. Otherwise, the compatible devices fail to communicate with the
patient monitor properly.