2-1
2 The Basics
2.1 Monitor Description
2.1.1 Intended Use
This patient monitor is intended to be used for monitoring, displaying, reviewing, storing
and transferring of multiple physiological parameters including ECG, respiration (Resp),
temperature (Temp), SpO
2
, pulse rate (PR), non-invasive blood pressure (NIBP), invasive
blood pressure (IBP), cardiac output (C.O.), End tidal CO
2
value (EtCO
2
) and anesthetic gas
(AG) of single adult, pediatric and neonatal patients.
This monitor is to be used in healthcare facilities by clinical professionals or under their
direction. It is not intended for helicopter transport or home use.
WARNING
z This patient monitor is intended for use only by clinical professionals or under
their guidance. It must only be used by persons who have received adequate
training in its use. Anyone unauthorized or untrained must not perform any
operation on it.
2.1.2 Contraindications
None
2.1.3 Components
This patient monitor consists of a main unit, display, ECG cables, SpO
2
sensor, NIBP cuff,
Temp sensor, IBP cables, C.O. cables, CO
2
components, AG components, etc.
To Next Page
Loading...
