5-7
5.9 Transferring a Configuration
When installing several monitors with identical user configuration it is not necessary to set
each unit separately. An USB storage card may be used to transfer the configuration from
monitor to monitor.
To export the current monitor’s configuration:
1. Insert the USB storage card into the monitor’s USB port.
2. Select [Transfer Config.] in the system configuration-main screen.
3. Select [Export Config.>>] in the transfer config menu and then select [Ok] in the
popup dialog box. A status message will report completion of the transfer.
To import the configuration in the card to the monitor:
1. Insert the USB storage card into the monitor’s USB port.
2. Select [Transfer Config.] in the system configuration-main screen.
3. Select [Import Config.>>] in the transfer config menu and then select [Ok] in the
popup dialog box. A status message will report completion of the transfer.
To Next Page
Loading...
