5-3
5.3 Viewing and Changing Configurations
In configuration mode, you can view, change and save all the configuration items for each
department.
1. After entering the configuration mode, verify that the current department is the one you
desire.
2. In the system configuration-main screen, select the desired configuration and then
select [View Config.].
3. As shown below, in the configuration category menu, you can view all the parameters
and conventional configuration items.
4. Select to enter a certain configuration category, e.g. ECG, then you can view all the
related configuration items by selecting [Prev Page] or [Next Page] and change them
if necessary.
5. After the change is done, select [Save Config.] to save the changed configuration. If
you have made some changes when viewing the default configuration of a certain
department, you can specify a name in the popup name configuration window to save
the changed configuration.
If the current department configuration is not the one you want to view, you can select
[Change Department >>] in the system configuration-main screen and then choose the one
you want for viewing as shown below. After returning to the main screen, you can still view
and change the configuration following the above steps.
To Next Page
Loading...
