7-5
When the alarm pause time expires, the alarm paused status is automatically cancelled and
the alarm tone will sound. You can also cancel the alarm paused status by pressing the
hardkey.
You can set the alarm pause time as desired in configuration mode. The default alarm pause
time is 2 minutes.
7.4.2 Switching Off Alarms
If you have set the alarm pause time as permanent, the monitor will enter the alarm off
status when you press the
hardkey. Besides the characteristics of the alarm pause status,
the alarm off status has the following characteristics.
îš„ [Alarm Off] is displayed in the physiological alarm area.
îš„ The
alarm off symbol is displayed in the alarm status symbol area.
You can cancel the alarm off status by pressing the
hardkey.
If a high level technical alarm, such as low battery, occurs, the alarm pause and alarm off
statuses are all automatically cancelled.
WARNING
z Pausing or switching off alarms may result in a hazard to the patient. Please be
very careful.
7.4.3 Silencing the Alarm Sound
You can silence all alarm sounds temporarily by pressing the hardkey on the monitor’s
front. In that case, the alarm lamps and alarm messages remain active and
appears in
the alarm status symbol area.
If the monitor switches to other alarm status or a new alarm occurs, the alarm sound
silenced status is automatically cancelled. You can also cancel the alarm sound silenced
status by pressing the
hardkey.
To Next Page
Loading...
Need help?
General