5-4
NOTE
z Changing the department will delete all the saved user configurations
automatically. Please act with caution.
5.4 Adding a Configuration
You can change monitor settings as required and then save the changed settings into a user
configuration. You can specify a name for the saved user configuration. The monitor can
save up to 3 sets of user configuration for the current department.
1. Select [Add Config.] in the system configuration-main screen.
2. In the load configuration menu, select a configuration as template.
[Defaults]: factory default configurations for each department.
user customized configuration: already saved user configuration
[Latest Settings under Monitor Mode]: If you have changed some settings
before entering the configuration mode, you can import these settings to your
newly added user configuration by selecting [Latest Settings under Monitor
Mode].
3. Enter a name and then select [Ok].
4. Change the settings if necessary and make sure that the settings are appropriate for
your patient.
5. After the change is done, select [Save Config.] or [Main] and then [Ok].
5.5 Deleting a Configuration
You can delete an already saved user configuration.
1. Select [Delete Config.] in the system configuration-main screen.
To Next Page
Loading...
