2-8
2.4 QuickKeys
A QuickKey is a configurable graphical key, located at the bottom of the main screen. They
give you fast access to functions. Their availability and the order in which they appear on
your screen, depend on how your patient monitor is configured.
By default, there are two QuickKeys that remain on the screen all the time to give you fast
access to functions.
Review tabular trends
Return to the main screen
Besides, you can have four more QuickKeys as shown below.
By selecting
or , you can unfold or fold the four QuickKeys. When there is no
operation on the four QuickKeys for 15 seconds after they are unfolded, they will be folded
automatically. Besides, you can set the four QuickKeys in configuration mode:
1. Enter the configuration mode. Select [Others] in either configuration.
2. In the [Select QuickKeys] area, select your desired QuickKeys 1-4.
3. Save the configuration.
The following QuickKeys can be selected:
Enter standby mode
Alarm Limits Setup
Change screen
Start Auto NIBP measurement
Zero IBP
Perform calculations
Mark Event
Discharge a Patient
To Next Page
Loading...
