2-7
4. Technical Alarm Area
This area shows technical alarm messages and prompt messages. When multiple
messages come, they will be displayed circularly. Select this area and the technical
alarm list will be displayed.
5. Physiological Alarm Area
This area shows physiological alarm messages. When multiple alarms occur, they will
be displayed circularly. Select this area and the physiological alarm list will be
displayed.
6. Waveform Area
This area shows measurement waveforms. The waveform name is displayed at the
upper left corner of the waveform. Select this area and the corresponding waveform
setup menu will be displayed.
7. Parameter Area
This area shows measurement parameters. Each monitored parameter has a parameter
window and the parameter name is displayed at the upper left corner. When this area
cannot accommodate all parameters, the excess parameters will automatically occupy
the waveform area from bottom to top. Select this area and the corresponding
measurement setup menu will be displayed.
8. Prompt Message Area
This area shows the prompt messages, network status icons, battery status icons, etc.
For details about battery status symbols, refer to the chapter Batteries.
indicates the patient monitor is connected to a wired network successfully.
indicates the wireless function is working.
indicates the patient monitor has failed to connect a wired network.
indicates the wireless function is not working.
indicates a CF storage card is inserted.
indicates an USB storage card is inserted.
9. QuickKeys Area
This area contains QuickKeys that give you fast access to functions.
To Next Page
Loading...
