5-5
2. In the select user configuration menu, select the user configurations you want to delete
and then select [Ok].
3. Select [Ok] in the popup dialog box.
5.6 Loading a Configuration
You may make changes to some settings during operation. However, these changes or the
pre-selected configuration may not be appropriate for the newly admitted patient. Therefore,
the monitor allows you to load aother user configuration of the current department under
monitoring mode so as to ensure that all the settings are appropriate for your patient.
To load a configuration,
1. In monitoring mode, select [Manage Configuration >>] from the main menu.
2. Select the default configuration or a certain user configuration according to the
patient’s condition.
3. Select [Ok].
NOTE
z In monitoring mode, only the default configuration of the current department or
the already saved user configuration can be loaded. You can only change the
department in configuration mode.
5.7 Setting Default Configuration at Startup
When the monitor restarts after quitting for over 120 seconds, it will load the pre-set default
configuration to restore the system configuration. The default configuration can be the latest
configuration, or a factory default configuration or user configuration.
To Next Page
Loading...
