10-10
A. Humidifier B. Humidifier sliding wheel
C. Humidifier bracket fixed seat D. Screw
E. Humidifier inlet F. Humidifier outlet
To disassemble the humidifier:
1. Remove the hoses connected to the humidifier.
2. Remove the screws.
3. Lift off the humidifier from the humidifier bracket fixed seat.
To install the humidifier:
1. Align the humidifier sliding wheel with the humidifier bracket fixed seat and slide in the
humidifier.
2. Tighten the screw.
3. Mount the filters onto the inspiratory and expiratory ports.
4. Connect the inspiratory filter to the humidifier inlet via the hose.
5. Connect the humidifier outlet to the water trap via the hose. Then, connect the water trap
to the Y piece via the hose.
6. Connect the expiratory filter to the water trap via the hose. Then, connect the water trap
to the Y piece via the hose.
7. Place the breathing hoses onto the support arm hook.
To Next Page
Loading...
Need help?
General
