EasyManua.ls Logo

Mindray SynoVent E5 - Page 83

Mindray SynoVent E5
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-15
4. [fSIMV]: Frequency of SIMV
5. [Flow]: Inspiratory flow
6 [Plimit]: Pressure limitation
7 [PEEP]: Positive end-expiratory pressure
8. [Exp]: Expiration trigger level
9. [Psupp]: Pressure support level
10. [Tslope]: Time of pressure rising
11. [F-Trig] or [P-Trig]: Inspiration trigger level
12. [fapnea]: Frequency of apnea ventilation
13. [Apnea Vent]: Apnea ventilation switch
In P-SIMV under non-NIV, you need to set the following ventilation parameters:
1. [O2%]: Oxygen concentration
2. [Pinsp]: Pressure control level of inspiration
3. [Tinsp]: Time of inspiration
4. [fSIMV]: Frequency of SIMV
5. [Tslope]: Time of pressure rising
6 [PEEP]: Positive end-expiratory pressure
7. [Exp]: Expiration trigger level
8. [Psupp]: Pressure support level
9. [fapnea]: Frequency of apnea ventilation
10. [F-Trig] or [P-Trig]: Inspiration trigger level
11. [Apnea Vent]: Apnea ventilation switch
12. [ATRC]: Automatic tube resistance compensation
In P-SIMV under NIV, you need to set the following ventilation parameters:
1. [O2%]: Oxygen concentration
2. [Pinsp]: Pressure control level of inspiration
3. [Tinsp]: Time of inspiration
4. [fSIMV]: Frequency of SIMV
5. [Tslope]: Time of pressure rising
6 [PEEP]: Positive end-expiratory pressure
7. [Exp]: Expiration trigger level

Table of Contents

Related product manuals