Mindray Z6 Service Manual

Preface 1-3
Video output
Remote port
VGA port
VGA signal output
AC indicator
Lower left corner on the control
panel
Battery indicator
Standby indicator
Lower right corner on the control
panel
Hard disk indicator
A
Probe connector A
Rear panel
B
Probe connector B
This product is provided with a CE
marking in accordance with the
regulations stated in Council
Directive 93 / 42 / EEC concerning
Medical Devices. The number
adjacent to the CE marking (0123) is
the number of the EU-notified body
certified for meeting the
requirements of the Directive.
1.3 Safety Precautions
Please read the following precautions carefully to ensure the safety of the patient and the
operator when using the probes.
DANGER
Do not operate this system in an atmosphere containing flammable or
explosive gases such as anesthetic gases, oxygen, and hydrogen or
explosive fluid such as ethanol because an explosion may occur.

Mindray Z6 Specifications

General

Brand	Mindray
Model	Z6
Category	Medical Equipment
Language	English