1-4 Preface
1.3.1 Electric safety
Do connect the power plug of this system and power plugs of
the peripherals to wall receptacles that meet the ratings
indicated on the rating nameplate. Using a multifunctional
receptacle may affect the system grounding performance, and
cause the leakage current to exceed safety requirements.
Do not use any cables other than the cables provided with the
device by Mindray.
Use the cable provided with this system to connect the printer.
Other cables may result in electric shock.
Disconnect the AC power before you clean or uninstall the
ultrasound machine, otherwise, electric shock may result.
Do not use this system simultaneously with equipment such as
an electrosurgical unit, high-frequency therapy equipment, or a
defibrillator, etc.; otherwise electric shock may result.
This system is not water-proof. If any water is sprayed on or
into the system, electric shock may result.
DO NOT connect or disconnect the system’s power cord or its
accessories (e.g., a printer or a recorder) without turning OFF
the power first. This may damage the system and its
accessories or cause electric shock.
Avoid electromagnetic radiation when perform performance
test on the ultrasound system.
In an electrostatic sensitive environment, don’t touch the
device directly. Please wear electrostatic protecting gloves if
necessary.
You should use the ECG leads provided with the ECG module.
Otherwise it may result in electric shock.
1.3.2 Mechanical Safety
When moving the system, you should first power off the
system, fold the LCD display, disconnect the system from
other devices (including probes) and disconnect the system
from the power supply.
Do not subject the probes to knocks or drops. Use of a
defective probe may cause electric shock to the patient.
Do not expose the system to excessive vibration (during the
transportation) to avoid device dropping, collision, or
mechanical damage.
To Next Page
Loading...
Need help?
General
