Mindray Z6 - Appendix A ELECTRICAL SAFETY INSPECTION; Revision History

I
Revision History
Mindray may revise this publication from time to time without written notice.
Revision
Date
Reason for Change
1.0
2012.03.20
Initial release
2.0
2011.09.01
1） A new model is added to the cover page. Z5/Z5BW/Z5T/Z5Vet;
2） 4.1 Hardware system overall structure: add hardware differences
between Z5 series and Z6 series systems;
3） Add principle description of main board and probe board of Z5
series to 4.2;
4） Add material information of main board and probe board of Z5
series to 7.2 field replaceable unit;
5） Increase disassembly steps of speaker in 7.4.9;
6） Update Appendix A electrical safety inspection form and limit value
requirement.
3.0
2013.04.17
Add FRU part number for HDD of different regions/types
(CE/FDA/human/vet)
4.0
2013.6.24
Add “The attentions to the assembly/disassembly, otherwise the hard disk
will be damaged” to Chapter 7.4.8.
5.0
2015.1.14
Section 7.2, add new main board FRU number and compatibility
description.
6.0
2015.6.10
Section 7.2, add new HDD FRU numbers for Z5 Vet FDA and Z5 FDA.
7.0
2015.7
Section 2.1.3, add printer SONY UP-D898MD and SONY UP-X898MD
8.0
2015.8
Section 7.2, change HDD and Main board FRU numbers.
9.0
2015.1.14
Change the FRU number of the display assembly in chapter 7.2
10.0
2016.4.10
Add HDD number in chapter 7.2.
11.0
2016.8.9
Update the labels in 1.2.2.
12.0
2016.9.23
Update FRU number of main board, HDD and PC module due to COME
module change matched with BayTrail.
13.0
2016.11.23
Update the log of Alarming and Abnormal Information in chapter 8.3
14.0
2018.8
Add part numbers of AC-DC board and DC-DC board in chapter 7
15.0
2018.9
Correct effective date of version 13.0 in the cover document.
© 2018 Shenzhen Mindray Bio-medical Electronics Co., Ltd. All Rights Reserved.