Minebea CC-Link CSD-892-73 - General Specifications; Specifications at the Time of Shipment; Accessories

CC-Link interface
Version of CC-Link : Ver.1.10
Occupied stations Nos. : Selectable from 1, 2 or 4 stations.
Communication method : Poling method
Synchronous method : Bit synchronous method
Baud rate : Selectable from 156 kbps, 625 kbps, 2.5 Mbps, 5 Mbps or
10 Mbps.
Transmission route : RS-485 bus
Transmission format : HDLC conforming
Remote station :
01 to 64 when one station is occupied.
01 to 63 when t
wo stations are occupied.
01 to 61 when four stations are occupied.
Connectable units :
64 units at maximum with occupied one station.
32 units at maximum with occupied two stations.
16 units at maximum with occupied four stations.
Connectable cable : Shielded twist pair special cable for [CC-Link]
Termination : Attached with 110 ohm resistance externally.
Status LED : Display the communication status b
y four (4) LEDs of
[RUN], [ERR], [SD] and [RD].
USB interface
Conforms to USB2.0 (Can also use with the standard of USB1.1)
Connector : mini USB B type (female)
18-4. General specifications
Operating temp./humidity
range
Temperaure -10 ℃ ~ 50 ℃
Humidity 85 %RH or less (Non-condensing.)
Stored temperature range -20 ℃ ~ 60 ℃
Power supply
Voltage
DC24 V (Permissible variable range DC20.4 V ~ DC27.6
V)
Consumption Approx. 2.4W (at DC24 V)
Outline dimensions 72 mm(W) x 96 mm(H) x 67.4 mm(D)
Weight Approx.260 g
18-5. Specifications at the time of shipment
Span adjustment 10 000 display at the input of 0.5 mV/V
Minimum scale interval 1
18-6. Accessories
Start guide Each 1 sheet written in Japanese and English
Short bar, between A-F and C-G 2 pieces
Connector for CC-Link interface 1 piece
139
Specications & Others