44
Setting of Function
6-13. Calibration data (For reference)
Scale interval, Weighing capacity, Mass of weight, ZERO mV/V value and SPAN mV/V value
set at present is referred by C function CF-90 ~ CF94.
6-14. Stability detection time width in calibration
Stability detection time width in calibration is set by C-function CF-97
Setting range : 00 ～ 99
：05
Unit : 0.1 s
6-15. Digital linearize clear
The setting data for digital linearize is cleared by C function CF-98
By pushing
key in the display condition of , blinks.
Please push
key at this time if you want to quit the digital linearization clear.
The display becomes
, and digital linearization clear is not executed.
By pushing
key when
blinks, the display becomes , and
the operation of digital linearization clear is completed.
6-16. C function clear
C function clear is executed by C function CF-99.
The set value of C function returns to default.
By pushing
key in the display condition of , blinks.
Please push
key at this time if you want to clear the memory.
The display becomes
, and the clear of memory is not executed.
By pushing
key in the display condition of blinking, the display becomes
and the operation of memory clear is completed.
• CF-90 ～ CF94 is C function to refer to the calibration data which is not cleared in
the clear memory execution.
To Next Page
Loading...