⑩ Display of net value
The display is set to net value.
ON : In requesting the display of net value (Operated once by OFF → ON).
OFF : Normal
⑪ Display of gross value
The display is set to gross value.
ON : In requesting the display of gross value (Operated once by OFF → ON).
OFF : Normal
⑫ Error release request flag
The error condition flag is released at the same time as releasing the sequence error,
ZERO s
et error and A/Z error. And also, the category and the number of error are cleared
to zero.
ON ：In requesting the release (Operated once by OFF → ON).
OFF ：Normal
⑬ Initial data setting request flag
CSD-892-73 is not equipped with, and the initialization is not executed.
ON ：In requesting the initialization.
OFF ：Normal
⑭ Error reset request flag
The release of error is requested when the occurrence of error is informed by error
condition flag RX(n+7)A. And also the category and the number of error are cleared to
zero.
ON ：In requesting the reset (Operated once by OFF → ON)
OFF ：Normal
⑮ Changeover flag of Net/Gross for indicated value
When one or two station(s) is/are occupied, the weighing value set in the range of
indicated value in remote register is changed as follows.
ON ：Gross weight
(Same as
Gross weight in remote register when four stations are occupied.)
OFF ：Net weight
(Same as Net weight in remote register when four stations are occupied.)
94
CC-Link
To Next Page
Loading...
Need help?
General