II
For safe operation
Be sure to read this manual before use.
1. Location of installation
Environment not to set up.
• Places exposed to direct sunlight and/or places in the high temperature.
• Places in a highly humid area.
• Places where the instrument is directly affected by vibrations or mechanical
shocks.
• Environments with full of dust or coarse particulates.
• Environments containing of corrosive g
as or salt.
• Environments with raid change in temperature and/or humidity.
• Near the devices which generate magnetism or electromagnetic waves.
• Environments vulnerable to radioactivity or radioactivity rays.
• Environments where chemical reaction may take place such as a laboratory.
Please set up into the operation control panel when the instrument is used in
the following places.
• Places where drop of water splashes.
• Places where many dust and fine particles exist.
●
Environmental temperature：-10 ℃ ~ 50 ℃（Preservation：-20 ℃ ~ 60 ℃）
●
Environmental humidity：85 %RH or less. (Non-condensing)
Warning
Caution
• Do not install the Instrument in following places.
It may cause damage to the Instrument.
• Use the Instrument under the following conditions.
To Next Page
Loading...
Need help?
General