Mitel 6905 - Page 123

113
M
ANAGING CALLS DND AND CALL FORWARD
2. In the above example, account 1 and account 2 are the accounts configured on the phone. Both
accounts have CFWD enabled as indicated by the CFWD All message.
NOTE: In Phone mode, when you change the call forward configuration for an account, the change
applies to all accounts.
3. Press the Call Forward key. The Call Forward menu displays. Use the navigation keys to
scroll through each state type.
4. In the above example, CFWD All is enabled as indicated by a check mark ( ), CFWD Busy is
enabled but no call forward phone number configured as indicated by a ! , and CFWD No Answer is
disabled, as indicated by an X.
5. Select a state using the navigation keys.
6. You can enable/disable a specific account on the phone with any or all of the following states.
However, the configuration you set will apply to all accounts on the phone.
– All: Forwards all incoming calls for the respective account to the specified number.
– Busy: Forwards incoming calls to a specified number if DND has been enabled for that account OR
if the account is currently engaged in another call.
– No Answer: Forwards incoming calls to a specified number if the call has not been answered for the
specified number of rings.
NOTE: If CFWD All, CFWD Busy, and CFWD No Answer are all enabled (and/or if the account
has DND enabled), the CFWD All settings take precedence over CFWD Busy and CFWD No
Answer.
You can also use the following keys if required:
– All Off: Disables all CFWD states for the current account in focus
– All On: Enables all CFWD states for the current account in focus
NOTE: In Phone mode, the initial configuration you set for an account applies to all the accounts
on the phone.