Mitel MiVoice Business SMB Controller User Manual

Deployment Steps for the MiVoice Business Solution on SMB Controller
Parameter Description
Country Country setting determines some Telephony
Server default settings. The country that
is displayed is derived from the timezone
that you specified during deployment. If an
"Other" country is chosen for the Country
setting, the ICW will only partially configure
the system. Additional manual configuration
will be required after initial deployment.
Telecom Region The Telecom Region determines the system's
phone numbering plan and default system
language. The region that is displayed is
derived by the ICW from the timezone that
you specified during deployment. The region
defaults to North America if ICW is unable to
derive a region from the timezone.
MiVB IP Address or FQDN IP address or FQDN of the MiVoice Business
telephony server (also known as the
MiVoice Business address) specified during
deployment. The value is pre-filled.
Licensing Key Licensing key specified during deployment.
The value is pre-populated.
Note:
If necessary, you can select a different Time Zone, Country, and Telecom Region.
If you select a Time zone that is not within one of Countries supported by the
system, the Country value is set to "Other" and the Telecom Region defaults to North
America.
Document Version 1.0
System Manual for Mitel SMB Controller 130

Mitel MiVoice Business SMB Controller Specifications

General

Brand	Mitel
Model	MiVoice Business SMB Controller
Category	Controller
Language	English