About SMB Controller
Parameter Interface FXS1...FXS6 of Mitel SMB
Controller
56V for long loop
ONS MWI Lamp Strike Voltage (VDC) The following formats are supported:
•
High voltage (>90Vdc)
Note:
This setting is country dependent.
•
Low voltage LED type: 12Vrms at 20Hz for
100ms
•
FSK
•
Polarity reversal
2.4.4 Mounting the SMB Controller
The SMB Controller is suitable for both wall and desktop installation as well as for mounting in a
19" rack. Different mounting sets are available for each type of installation.
2.4.4.1 Equipment supplied
The equipment supplied with the SMB Controller includes:
•
Mitel SMB Controller communication server with a CPU module fitted and a fan mounted
•
Set of screws for wall or desktop installation and earthing connection
•
Snap-on tag
•
Power supply (The power cord is a separate part and this needs to be ordered depending on
country)
Part Number Description Country
51000582 PWR CRD C7 2.5A 250V-
UK PLUG 3A FUSE
UK, Hong Kong, Ireland,
Singapore, Saudi
Document Version 1.0
System Manual for Mitel SMB Controller 44
To Next Page
Loading...
Need help?
General
