Mitel MiVoice Business SMB Controller User Manual

Deployment Steps for the MiVoice Business Solution on SMB Controller
9.1.5.1 Configure Network Interfaces
For configuring network interfaces for SIP-trunks, you need to connect to the SMB Controller.
1. Log in to the SMB Controller Manager.
2. Navigate to the Configuration - IP network.
3. In the Network interfaces view, configure Ethernet interfaces (eth0-eth2), with an IP4
address/subnet mask and a default router.
9.1.6 Set Date and Time
To change the Date and Time:
1.
Log into the SMB Controller Manager and under Configuration, select Date and Time.
2.
Modify the fields with appropriate responses.
3.
Do either of the following:
•
If you are using the NTP server, do the following
a.
Select System time zone.
b.
Enable the Time synchronisation via time server option.
c.
Ensure that the NTP servers specified are correct.
•
If you are not using the NTP server, do the following:
a.
Disable the Time synchronisation via time server option.
b.
Enter the system date in the System date field.
c.
Enter the system time in the System time field.
d.
Set the current date in the Set current date field.
e.
Set the current time in the Set current time field.
Document Version 1.0
95 System Manual for Mitel SMB Controller

Mitel MiVoice Business SMB Controller Specifications

General

Brand	Mitel
Model	MiVoice Business SMB Controller
Category	Controller
Language	English