Mitel MiVoice Business SMB Controller User Manual

About CloudLink Gateway
6
The CloudLink Gateway (CLGW) Blade provides integration with CloudLink-based (for example,
CloudLink API program or Mitel Assistant).
Limitations
•
The embedded CloudLink Gateway is intended only to service the users of a single SMB Controller
platform.
Note:
Larger deployments should use an offboard CloudLink Gateway
•
If the MiVoice Border Gateway/CloudLink Gateway is offboard, the CloudLink Gateway is expected
to be offboard too.
Note:
The CloudLink Gateway for MiVoice Office 400 on SMB Controller application (installable
via SMB Controller Manager). Be sure to install the CloudLink Gateway for MiVoice
Business for this installation, and not the CloudLink Gateway for MiVoice Office 400 which
can run on the same hardware.
Networking
•
CloudLink Gateway Blade will use the SMB Controller's ETH0 Ethernet port to access the
CloudLink services. As a result, it requires access to the CloudLink Cloud Service via the
Customer's Internet Gateway.
Note:
Eth0 should never be directly connected to the Internet.
For more information about the CloudLink Gateway, refer to the CloudLink Documentation and
CloudLink Onboarding for MiVoice Business
Document Version 1.0
System Manual for Mitel SMB Controller 76

Mitel MiVoice Business SMB Controller Specifications

General

Brand	Mitel
Model	MiVoice Business SMB Controller
Category	Controller
Language	English