Mitel MiVoice Business SMB Controller User Manual

•
The MiVoice Border Gateway must use the second LAN IP Address programmed in MSL. For more
details, see Initial MSL Network Setup on page 102.
•
The MiVoice Border Gateway will also use a WAN address programmed in MSL. This WAN
connection is expected to be connected directly to the internet (via an ISP router). For more details,
see Initial MSL Network Setup on page 102.
•
The Eth1 Port is enabled and DHCP deselected in the SMB Controller Manager's IP Network
Panel.
For more information about installing and maintaining the MiVoice Border Gateway, refer to the
MiVoice Border Gateway Installation and Maintenance Guide and MiVoice Border Gateway (MBG) Rel
11.5 I&M Self-Study

Mitel MiVoice Business SMB Controller Specifications

General

Brand	Mitel
Model	MiVoice Business SMB Controller
Category	Controller
Language	English