20-495 20-495
Figure 20-9 Tact Time Calculation Results (Calculation of Axis Load Level Impossible)
The axis load level (J1-J6 each axis) and the tact time are displayed for robots that can measure the axis load
level.
The calculation result for axis load level is displayed as %.
Figure 20-10 Tact Time Calculation Results (Calculation of Axis Load Level Possible)
calculation results are
added sequentially.
This information is
cleared when the
simulation is started
again.
calculation results
for this calculation
are displayed.
The calculation results are added
sequentially.
This information is cleared when
the simulation is started again.
The tact time calculation
results for this calculation
are displayed.
calculation results for this
calculation are displayed.
To Next Page
Loading...
