Mitsubishi Electric GX Configurator-AD (SW2D5C-QADU-E) User Manual

6
PROGRAMMING
6.5 For Use in Remote I/O Network (Q66AD-DG)
6.5.2 Programming example without using the utility package
6 - 38
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
SETUP AND PROCEDURES BEFORE OPERATION
5
UTILITY PACKAGE (GX CONFIGURATOR- AD)
6
PROGRAMMING
7
ONLINE MODULE CHANGE
8
TROUBLESHOOTING
Read the warning output flag.
Processing at CH2 process alarm upper limit
value warning occurrence
Processing at CH2 process alarm lower limit
value warning occurrence
Processing at CH3 rate alarm upper limit value
warning occurrence
Processing at CH3 rate alarm lower limit value
warning occurrence
Read the input signal error detection flag.
Processing at CH1 input signal error detection
Turn ON the error clear request (YF).
Turn ON the error clear request (YF).
Read the error code.
Output the error code in BCD.
Turn OFF the error clear request (YF).
Concurrently read the A/D conversion
completed flag and CH1 to CH3 digital output
values.
Turn OFF operation condition setting
request (Y9)
Read the CH2 digital output value.
Read the CH3 digital output value.
Read the CH1 digital output value.
* Input signal error detection status and processing at error detection
* Error code display and reset processing
* Warning (process alarm, rate alarm) occurrence status and processing at warning occurrence
* Digital output value read processing
Processing at error detection
Processing at warning occurrence
Processing at warning occurrence
Processing at warning occurrence
Processing at warning occurrence

Mitsubishi Electric GX Configurator-AD (SW2D5C-QADU-E) Specifications

General

Brand	Mitsubishi Electric
Model	GX Configurator-AD (SW2D5C-QADU-E)
Category	Control Unit
Language	English