Mitsubishi Electric GX Configurator-AD (SW2D5C-QADU-E) User Manual

8
TROUBLESHOOTING
8.1 Error Code List
8 - 4
1
OVERVIEW
2
SYSTEM CONFIGU- RATION
3
SPECIFICATIONS
4
SETUP AND PROCEDURES BEFORE OPERATION
5
UTILITY PACKAGE (GX CONFIGURATOR- AD)
6
PROGRAMMING
7
ONLINE MODULE CHANGE
8
TROUBLESHOOTING
(1) When two or more errors have occurred, the latest error found by the A/D
converter module is stored.
(2) The error codes marked with *1 can be cleared by turning ON the error clear
request (YF).
(3) Error code 161 marked with *2 is not stored in the Error code (Un\G19) area.
It is written to the Completion status area, (S) + 1, of the G(P).OGSTOR
instruction.
(4) The error codes marked with *3 can be cleared by one of the following opera-
tions.
(a) Turning on the error clear request (YF)
(b) Turning on the operating condition setting request (Y9) after correcting the
set value to the one in the setting range

Mitsubishi Electric GX Configurator-AD (SW2D5C-QADU-E) Specifications

General

Brand	Mitsubishi Electric
Model	GX Configurator-AD (SW2D5C-QADU-E)
Category	Control Unit
Language	English