Mitsubishi Electric MELSERVO-JN Series - Page 438

13 - 87
13. POSITIONING MODE
(5) Inserting point table data ( e) )
Click the "Insert" button to insert one row just above the selected point table No. The rows of the selected
table No. and below are shifted down.
(6) Deleting point table data ( f) )
Click the "Delete" button to delete all data in the selected point table No. The rows below the selected
table No. are shifted up.
(7) Changing point table data ( g) )
Click the data to be changed, enter a new value into the input field, and press the enter key.
(8) Reading point table data
Point table data in a file can be read and displayed. Click "Project" on the menu bar to read the point table
data.
(9) Saving point table data
All displayed point table data on the window can be saved. Click "Project" on the menu bar to save the
point table data.
(10) Printing point table data
All displayed point table data on the window can be printed. Click "Project" on the menu bar to print the
point table data.
(11) Closing point table data ( h) )
Click the "Close" button to close the window.