Mitsubishi Electric MELSERVO-JN Series - Page 472

Revision Date *Manual Number Revision
Feb., 2011 SH(NA)030086ENG-B
Section 5.10.2 (2)
Section 5.10.3 (1) (d)
Section 5.10.4 (2)
Section 5.10.5
Section 5.11
Chapter 6
Section 6.1
Section 6.1.1
Section 6.1.2
Section 6.2
Section 6.3
Section 6.3.1
Section 6.3.2
Section 6.5
Section 7.1
Section 7.1.1
Section 7.1.2
Section 7.1.3
Section 7.2.2 (2)
Section 7.2.3 (1)
Section 7.2.3 (2)
Section 7.2.4
Section 7.2.5
Section 7.3
Section 7.3.2
Section 7.3.3
Section 7.3.4
Section 8.1
Partially changed.
Partially changed.
Partially changed.
Partially changed.
Partially changed.
POINT is partially added.
Partially changed.
Partially changed.
Partially changed.
"(1) Gain adjustment made by the auto tuning mode
(parameter No. PA08)" is changed to "(1) One-touch tuning".
"(2) One-touch tuning" is changed to "(2) Gain adjustment
made by the auto tuning mode (parameter No. PA08)".
Title is changed.
"Auto tuning" is changed to "Auto tuning mode 1".
Title is changed.
"Auto tuning mode 1" is changed to "Overview".
POINT is partially changed.
Title is changed.
"Auto tuning mode 1 operation" is changed to "Auto tuning
mode 1 basis".
Diagram is partially changed.
POINT is partially changed.
Partially changed.
POINT is added.
Partially changed.
Caution is added.
Partially added and changed.
Partially changed.
Caution is added.
Partially changed.
Partially changed.
Partially changed.
Changed to a table format.
Partially changed.
Partially changed.
POINT is added.
Partially changed.
Partially changed.
Partially changed.
Title is changed.
"Gain changing operation" is changed to "Gain changing
procedure".
Partially changed.
Partially changed.
"LED display" is changed to "3-digit, 7-segment LED".
Following alarms and warnings are added.
A.39 Program error
A.61 Operation alarm