Mitsubishi Electric MELSERVO-JN Series - Page 475

Revision Date *Manual Number Revision
Feb., 2017 SH(NA)030086ENG-C Section 3.8.3 Partially changed.
App. 5 The contents are entirely changed.
App. 6 Deleted.
Jun., 2019 SH(NA)030086ENG-D Safety Instructions Partially changed.
1. To prevent electric shock,
note the following
Partially added.
2. To prevent fire, note the
following
Partially changed.
4. Additional instructions Partially added and changed.
FOR MAXIMUM SAFETY Partially changed.
Precautions for Choosing
the Products
Partially changed.
About the manuals Partially added.
Introduction Partially changed.
Chapter 1
Section 1 Partially changed.
Section 1.2 Partially changed.
Section 1.3 Partially changed.
Section 1.5 Partially added.
Section 1.6 HG-KR G1/G5/G7 is added
Section 1.8 Partially changed.
Chapter 2 Caution is partially changed.
Section 2.1 Caution is partially changed.
Section 2.4 Partially added and changed.
Section 2.5 Partially changed.
Chapter 3 Warning is partially added.
Caution is partially changed.
Section 3.1 Partially changed.
Section 3.2.1 Diagram is partially changed.
Note 6 is partially changed.
Note 16 changed to 15.
Section 3.2.2 Note is partially changed.
Section 3.2.3 Note is partially changed.
Section 3.3.1 Signal explanations are partially changed.
Section 3.4.2 Partially changed.
Section 3.5.1 Partially changed.
Section 3.6.1 (4) Caution is partially added.
Section 3.6.2 (1) (a) and (b) Parameters No. PD03 are changed to PD02.
Section 3.6.3 (3) (a) and (b) Parameters No. PD03 are changed to PD02.
Section 3.10 Caution is partially changed.
Section 3.10.1 Warning is partially changed.
Section 3.10.2 (1) HG-KR G1/G5/G7 is added.
Section 3.10.2 (1) (b) Connector and Cord clamps are partially changed.
Section 3.11.1 Caution is partially changed.
Section 3.11.4 HG-KR G1/G5/G7 is added.
Section 3.12 Diagram is partially changed.
Chapter 4 Caution is partially changed.
Section 4.1.13 (4) POINT is partially changed.
Section 4.2.2 Detail list is partially changed.
Section 4.3.1 Extension setting parameters.
Parameter list is partially changed.
Section 4.3.2 List of details is partially added and changed.
Section 4.4.1 I/O setting parameters
Parameter list is partially changed.
Section 4.4.2 List of details is partially changed.