114
WT07627X03
[1] Offsetting the measured temperature/humidity values
To set the offset value for the measured values, click [Acquire] to acquire the current value, and set the offset value
according to your usage environment.
Note: If AI controller connection settings for a given centralized controller have not been saved, the “measurement value” will not
be displayed even when [Acquire] is clicked.
Note: When registering an AI controller for the first time, the “measurement value” cannot be acquired. To input the “offset value”
after acquireing and checking the “measurement value”, once the setting information must be sent to the centralized
controller. After registering the AI controller and temperature/humidity sensors, send the settings data to the centralized
controller. (See section 6-2-3 [5] “Send”.)
Note: The default offset value for temperature sensor is “0.0”. The settable offset value range is between -10.0ºC (-18.0ºF) and
+10.0ºC (+18.0ºF).
Note: The default offset value for humidity sensor is “0.0”. The settable offset value range is between -10.0% and +10.0%.
To Next Page
Loading...
Need help?
General
