198
WT07627X03
(5) In the [Internet Protocol Version 4 (TCP/IPv4) Properties] window,
check the radio button next to [Use the following IP address].
(6) Enter the PC’s IP address (e.g., [192.168.1.101]) in the “IP
address” field.
(7) Enter the subnet mask [255.255.255.0] (unless otherwise specified)
in the “Subnet mask” field.
(8) In the “Default gateway” field, enter the gateway address as
necessary.
Important
● Consult the system administrator to decide the IP, subnet mask, and gateway addresses.
(9) Keep clicking [OK] or [Close] to close all windows.
[2] For Windows 8.1
(1) Click the [Desktop] icon on the Start screen.
(2) Double-click the [My Computer] icon on the desktop.
(3) Click [Open Control Panel] in the tool bar.
(4) Click the [Network and Sharing Center] icon.
(5) Click [Change adapter settings].
(6) Double-click the [Ethernet] icon.
(7) In the “Ethernet Status” window, click [Properties].
(8) Click [Internet Protocol Version 4 (TCP/IPv4)] to select it, and click [Properties].
(9) In the [Internet Protocol Version 4 (TCP/IPv4) Properties] window, check the radio button next to [Use the
following IP address]
(10) Enter the PC’s IP address (e.g., [192.168.1.101]) in the “IP address” field.
(11) Enter the subnet mask [255.255.255.0] (unless otherwise specified) in the “Subnet mask” field.
(12) In the “Default gateway” field, enter the gateway address as necessary.
To Next Page
Loading...
Need help?
General
