EasyManuals Logo

Mitsubishi AE-200A User Manual

Mitsubishi AE-200A
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #209 background imageLoading...
Page #209 background image
209
WT07627X03
Error code list
Error codes that can be detected with AE-200/AE-50 (EW-50) and their definitions are shown below.
Refer to [3] “Errors on other related equipment” for errors on DIDO controller or AHC.
For other error codes, refer to the manual of the equipment of the error source address.
If an error occurs, note the error code and consult your dealer.
[1] M-NET errors
6600 Communication error - Address duplicate
6601 Communication error - Polarity unsettled
6602 Communication error - Transmission processor hardware error
6603 Communication error - Transmission line busy
6604 Communication error - No ACK (06H) (communication circuit error)
6605 Communication error - No response frame
6606 Communication error - Transmission processor communication error
6607 Communication error - No ACK return
6608 Communication error - No return of response frame
[2] AE-200 and AE-50 (EW-50) errors
0092 Version combination error
0093 System configuration change warning
0094 “Charge” license not registered
0095 Warning - possibility of damaged metering device
0096 Air conditioning charges file automatic output abnormality
0097 Apportioned calculation data collection error
6920 Communication error - No response error
6922 Communication error - Receiving frame ID error
7106 System abnormality - Attribute setting error
7109 System abnormality - Connection setting error
7130 System abnormality - Different unit model error
7901 System abnormality - Excessive number of connected units
7902 System abnormality - Connection lock error
7903 System abnormality - Unit information error
7904 System abnormality - System setting error
7905 System abnormality - Version error/Different unit model error
[3] Errors on other related equipment
0100 Equipment abnormality
01*0 Equipment abnormality (PAC-YG66DCA) in system *
01** Equipment abnormality in system **
(When these errors occur on the DIDO controller (PAC-YG66DCA), the error code will not appear, but the error status display
LED on the DIDO controller of the system in error will light up.)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi AE-200A and is the answer not in the manual?

Mitsubishi AE-200A Specifications

General IconGeneral
BrandMitsubishi
ModelAE-200A
CategoryControl Systems
LanguageEnglish

Related product manuals