80
WT07627X03
(2) In the [Control levels] section, select a maximum temperature value for each group to be added to or
sabtracted from the set temperature.
For example, when [±4°C] (±8°F) is selected and the set temperature for the Cool or the Dry mode is set to
24°C (75°F), the set temperature will be adjusted to a maximum of 28°C (83°F) based on the temperature
difference between the set temperature and the outdoor temperature. When [±2°C] (±4°F) is selected, the set
temperature will be adjusted to maximum of 26°C (79°F).
Note: When the unit of temperature is Fahrenheit, the selected temperature value may not be added to the set temperature
accurately because 2ºC is used for the calculation first, and then the temperature in Celsius is converted into the
temperature in Fahrenheit.
(3) Touch [Save Settings].
To Next Page
Loading...
Need help?
General
