Motorola AP-6511 - Page 32

Motorola Solutions AP-6511 Access Point System Reference Guide
3-8
For the purposes of this example, select Use DHCP and uncheck Configure VLANs Manually.
The DHCP Address Assignment section contains configuration for the DHCP server on the LAN
interface.
The Domain Name Server (DNS) section contains configuration for the DNS server on the LAN
interface.
Configure VLANs
Manually
Select the Configure VLANs Manually checkbox to enable advanced manual
VLAN configuration.
For more information on VLAN configuration see Virtual Interface
Configuration on page 7-11.
Advanced VLAN
Configuration
Select the Advanced VLAN Configuration button to set associations between
VLANs and physical interfaces.
Use the Controller to
assign IP addresses
to devices
Select the Use the Controller to assign IP addresses to devices checkbox
to enable the DHCP server to provide IP and DNS information to clients on the
LAN interface.
IP Address Range Enter a starting and ending IP Address range to assign to clients on the LAN
interface. It’s good practice to avoid assigning IP addresses from
x.x.x.1 - x.x.x.10 and x.x.x.255 as they are often reserved for standard services
on most networks.
Primary DNS Enter an IP Address for the main Domain Name Server providing DNS services
for the AP-6511 LAN interface.
Secondary DNS Enter an IP Address for the backup Domain Name Server providing DNS
services for the AP-6511 LAN interface.