5 - 10 MC9190-G User Guide
Four Slot Spare Battery Charger
CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 6-1.
This section describes how to use the Four Slot Spare Battery Charger to charge up to four MC9190 spare
batteries.
Figure 5-5
Four Slot Spare Battery Charger
Insert the battery into a spare battery charging slot and gently press down on the battery to ensure proper contact.
An amber LED is provided on each battery charging well. See Table 5-2 for charging status indications.
The battery usually charges in less than four hours.
Magnetic Stripe Reader
This section describes how to set up and use the snap-on MSR with the MC9190-G. The MSR snaps on to the
bottom of the MC9190-G and can be easily removed when not in use.
Table 5-3
Spare Battery LED Charging Indicators
LED Indication
Off No spare battery in slot; spare battery not placed correctly; cradle is not powered.
Fast Blinking Amber Error in charging; check placement of spare battery.
Slow Blinking Amber Spare battery is charging.
Solid Amber Charging complete.
Spare Battery
Charging LEDs (4)
Spare Battery
Spare Battery
Charging Well (4)