Accessories 5 - 11
Figure 5-6
Magnetic Stripe Reader
When attached to the MC9190-G, the MSR:
•
Provides power for operating the MC9190-G, with the appropriate power connection.
•
Allows the MC9190-G to capture data from magnetic stripe cards. (To download MSR data capture software,
visit: http://supportcentral.motorola.com.)
•
Provides serial connection through the serial pass-through port for communication with a serial device, such
as a host computer.
•
Provides USB connection through the USB pass-through port for communication with a USB device, such as
a host computer.
•
Charges the MC9190-G’s battery, when used with the appropriate power supply.
Attaching and Removing
To attach, snap the MSR onto the bottom of the MC9190-G.
Card Reader Slot
Latches
Power Port
Communications Port
Pogo Pin Pass-through
Connector
Latch Grip
NOTE When a MC9190-G with Windows Mobile 6.5 is connected to a host computer through the MSR and an
ActiveSync connection is made, the WLAN radio (if applicable) are disabled. This is a Microsoft security
feature to prevent connection to two networks at the same time.
To Next Page
Loading...
Need help?
General
