5 - 8 MC9190-G User Guide
Four Slot Ethernet Cradle
This section describes how to use a Four Slot Ethernet cradle with the MC9190-G.
Figure 5-3
Four Slot Ethernet Cradle
The Four Slot Ethernet cradle:
•
Provides 12 VDC power for operating the MC9190-G.
•
Enables data communication between the MC9190-G (up to four) and a host computer, over an Ethernet
network (using a standard 10Base-T Ethernet cable).
•
Synchronizes information between the MC9190-G and a host computer. (With customized or third party
software, it can also be used to synchronize the MC9190-G with corporate databases.)
•
Simultaneously charges up to four batteries in the MC9190-G.
The MC9190-G’s amber charge LED, located in the Indicator LED Bar, shows the status of the battery charging in
the MC9190-G. See Table 1-1 on page 1-4 for charging status indications.
The battery usually charges in less than four hours.
CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 6-1.
CAUTION Do not place coins, keys or paper clips in cradle well.
To Next Page
Loading...
Need help?
General
