1 - 8 MC9190-G User Guide
1. On devices with Windows CE 6.0, tap Start > Settings > Control Panel > Backlight > Battery Power.
or
On devices with Windows Mobile 6.5, tap Start > Settings > System > Backlight > Battery Power.
2. Select the On battery power: Disable backlight if not used for: check box and select a value from the drop-down
list box.
3. Tap the Brightness tab.
4. Tap the Disable backlight check box to completely turn off the display backlight.
5. Use the slider to set the brightness of the backlight. Set it to a low value to save battery power.
6. Tap OK.
Changing the Keypad Backlight Settings
To change the keypad backlight settings in order to conserve more battery power:
1. On devices with Windows CE 6.0, tap Start > Settings > Control Panel > Keylight > Battery Power.
or
On devices with Windows Mobile 6.5, tap Start > Settings > System > Keylight > Battery Power.
2. Select the On Battery Power: Disable keylight if not used for: check box and select a value from the drop-down
list box.
3. Tap Advanced.
4. Tap the Disable keylight check box to completely turn off the display backlight.
5. Tap OK.
Turning Off the Radios
On Devices with Mobile 6.5
Windows Mobile 6.5 devices include Wireless Manager, which provides a simple method of enabling, disabling, and
configuring all the device’s wireless capabilities in one place.
1. To open Wireless Manager, tap the Status Bar and then the Connectivity icon and select Wireless Manager.
or tap Start > Settings > Connections > Wireless.
2. To enable or disable a wireless connection, tap its blue bar.
3. To enable or disable all wireless connections, tap and hold the All bar.
4. To configure settings for a connection, tap Menu.
On Device with CE 6.0
WLAN Radio
To turn off the WLAN radio tap the Fusion Signal Strength icon on the task tray and select Disable Radio. A red
X appears across the icon indicating that the radio is disabled (off).
To Next Page
Loading...
Need help?
General
