4 - 4 MC9190-G User Guide
With Microsoft Bluetooth Stack
Performing a cold boot retains the state of the Bluetooth radio prior to the cold boot.
Warm Boot
With StoneStreet One Bluetooth Stack
Performing a warm boot turns off Bluetooth.
With Microsoft Bluetooth Stack
Performing a warm boot retains the state of the Bluetooth radio prior to the warm boot.
Suspend
When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the active
connection. When there is no active connection, the Bluetooth radio turns off.
With StoneStreet One Bluetooth Stack
With Microsoft Bluetooth Stack
Resume
When the MC9190-G resumes, Bluetooth turns on if it was on prior to suspend.
NOTE If there is an active Bluetooth connection between the MC9190-G and another Bluetooth device, the
MC9190-G will not timeout. However, if the user presses the Power button on the MC9190-G, the MC9190-G
will suspend and upon receiving data from a remote Bluetooth device, the MC9190-G will wake from suspend
mode. For example, Bluetooth scanner sending data to the MC9190-G.
NOTE If there is an active Bluetooth connection between the MC9190-G and another Bluetooth device and there is
no data activity, the MC9190-G will timeout. However, if the user presses the Power button on the MC9190-G,
the MC9190-G will suspend and upon receiving data from a remote Bluetooth device, the MC9190-G will
wake from suspend mode. For example, headset redial or Bluetooth scanner sending data to the MC9190-G.
To Next Page
Loading...
Need help?
General
